For use in single-line lubrication systems
The gear pump continuously supplies lubricant to re-lubrication metering devices via the main line network when the pump is in operation. When the metering chambers of the metering devices are full, excess lubricant flows back into the reservoir via the safety valve. At the end of the pump running time, the pressure relief valve opens.
The pressure in the main line drops to a residual pressure of 0,2 to 1,0 bar (2.9 to 14.5 psi), allowing the spring-loaded pistons of the metering devices to deliver lubricant from the metering chambers to the lubrication points.
Rolling Bearings
Mounted bearings and housings
Super-precision bearings
Slewing bearings
Marine Bearings – ORKOT
Maintenance products
Linear technology
Motion Plastics – IGUS
Lubrication systems & Pump systems
Sealing solutions
Power transmission solutions
Rod ends, spherical plain bearings
Couplings
Brake linings
Expansion joints
Shaft braking systems
Motors
Antivibration mountings
Bushings, thrust washers and strips