Cabled electro-mechanical single point automatic lubricators SKF TLSD1-DK

SKF SYSTEM 24 - TLSD1-DK

For applications that are occasionally in operation.

The Cabled single point automatic lubricator is based on the proven single point automatic lubricator TLSD series. Main differentiators are the direct power supply from the machine's control panel and the wired signal function towards the machine's PLC.

Cabled single point automatic lubricators can be set to help ensure that the correct quantity of lubricant is delivered over a set time period and when the machine is running. Because of being powered from an external power supply, it can be switched on and off when necessary. This allows more accuracy of the amount of lubricant supplied compared to traditional manual re-lubrication techniques. The lubricator's output signals can be used and stored within the equipment’s PLC.

The Cabled single point automatic lubricator has been developed for applications which are not running continuously.

Features & benefits

- Possibility to lubricate only when the equipment is running
-Control and monitoring through machine PLC connection
- Suitable for both direct and remote installation
- Direct power supply
- Temperature independent dispense rate
- Maximum discharge pressure of 5 bar
- (75 psi) over the whole dispensing period
- Dispense rate available in various settings
- Red-yellow-green LEDs indicate the lubricator’s status
- Reduce the service visits
- Cartridges filled with SKF Lubricants especially developed for bearing applications
- Transparent cartridge reservoir allows visual inspection

Typical applications

- Critical applications where extreme reliability and additional monitoring is required
- Industrial equipment
- Elevators
- Compressors

Accesories

- SKF DialSet software helps to calculate the correct dispense rate
- Extensive range of accessories

Product Details

Α. Drive unit - TLSD 1-DK
Top part with electric drive and time setting wheel. Supplied with cable, plastic cap and support plate for grease lubrication (TLSD 1-SP)

Β. Lubricant cartridge - e.g. LGWA 2/SD250
Replaceable cartridge filled with 125 ml or 250 ml of SKF grease or oil.

C. Support plate
The support plate TLSD 1-SP for grease lubrication is supplied with TLSD 1-DK.
A support plate for oil lubrication with integrated non return valve (TLSD 1-SPV) can be ordered separately.